Security

Anti-burglary roller shutters of the Security
series
Security roller shutter systems are an ideal solution for shops and offices, as well as private homes. with high safety requirements for window and door openings.

The Security assortment includes roller shutters made from profiles with solid (super-hard) foam filling and extruded profiles, which have increased burglary resistance.

• Profiles up to 14 mm thick • Thickness of aluminum tape 0.33-0.36 mm • Tire thickness ≥ 1.1 mm • Paint coating thickness 30 microns • Coating color uniformity ∆E<1 • Up to 5000 lift-lower cycles • More than 19 colors

Characteristics of Security roller shutters

Roller shutter profiles
The profiles are made of high-quality aluminum tape with a two-layer paint coating, which is highly wear-resistant. Thanks to foam filling, the profiles have heat and sound insulation characteristics.

ARH/40(N) - aluminum profile with soft foam filling and two-layer paint coating. Profiles can be with or without perforation. Perforated profiles have narrow holes along the top locking part. Diffused light penetrating through the holes creates a pleasant twilight.

ARN/37S(N) - Aluminum profile with super-hard foam filling. When using a special anti-hurricane configuration, roller shutters made from the ARH/37S profile can withstand pressures of up to 1225 Pa (≈ 45 m/s), which is comparable to powerful hurricanes.

ARN/55(N) - aluminum profile with hard foam filling and two-layer paint coating. Profiles can be with or without perforation. Perforated profiles have narrow holes along the top locking part. Diffused light penetrating through the holes creates a pleasant twilight.

Extruded profiles

Extruded profiles for roller shutter systems are made from aluminum poles using pressing technology through die dies. Roller shutters made from these profiles are characterized by increased resistance to burglary due to the large wall thickness and the presence of a transverse stiffener.

AER44/S - Extruded aluminum profile, increased strength with a wall thickness of 1.0 mm.

AER44m/S - extruded aluminum profile with a wall thickness of 0.8 mm.

AER55m/S - extruded aluminum profile, increased strength with a wall thickness of 1.0 mm.

AER55/S - extruded aluminum profile, increased strength with a wall thickness of 1.0 mm.

AER55/SCR - aluminum extruded profile of increased strength. When using special equipment, high anti-burglary characteristics are ensured.

Guide bars
Alutech produces and offers a wide range of protective boxes: 20 and 45 degree, round and semicircular, a system of built-in boxes. A large selection of standard box sizes - from 125 to 405 mm - allows you to install roller shutters on openings of various sizes. The assortment includes aluminum rollforming and extruded protective boxes.

Color solutions for Security roller shutters

A wide range of colors of profiles and components for Security roller shutters - 20 colors for roller-rolled profiles, 19 colors for extruded profiles - provides a variety of options for combining roller shutters with the building facade. Depending on the color, roller shutter systems can blend into the facade or, on the contrary, serve as a bright element, creating original and individual solutions.

The color range of the roller shutter system frames is also presented in a wide range of colors:
• Protective boxes 20° and 45° – 14 colors;
• Protective round / semicircular boxes and side covers; guide rails and end profiles – 19 colors with a glossy surface and 6 colors with a pebbled surface.

You can choose different combinations of the color of the canvas and the frame of the roller shutter. For example, the canvas matches the color of the building facade, and the frame matches the color of the roof, or vice versa.