AN-Motors

Accessories AN-Motors

To increase the efficiency of automation operation, comfort and safety, you can use additional elements - accessories.

Remote control AN-Motors AT-4

Remote Control Features:
• Execution in the form of a keychain;
• Dynamic code;
• Number of controlled devices – up to four;
Designed for remote control of gate automation AN-Motors

Technical characteristics of AT-4:
• Operating frequency: 433.92 MHz;
• Radiation power: no more than 2 mW;
• Range in open space: at least 50 m;
• Battery: 12 V / type 27 A;
• Housing protection degree: IP40;
• Ambient temperature, °C: -20 … +55.

External radio receiver AN-Motors AR-1-500

Features of the radio:
• Control of one device (single-channel);
• Small dimensions and weight;
• Relay output with normally open contact (NO);
• Built-in cable for connection;
• Built-in antenna;
Designed for remote control of gate automation

Technical characteristics of AR-1-500:
• Supply voltage: 12 V - 24 V AC/DC;
• Maximum current consumption: 18 mA;
• Operating frequency: 433.92 MHz;
• Number of programmable control panels: up to 500 pcs;
• Relay output contact load: 1A max. / 24 V DC;
• Housing protection degree: IP40;
• Ambient temperature, °C: -20 … +55.

Photocells AN-Motors P5103

Features of photocells:
• Small dimensions and weight;
• Relay output with normally closed and normally open contacts (NC/NO);
• Visualization of work using LED;
Designed to detect obstacles within the range of photocells.

P5103 Specifications:
• Power supply: 12 V - 24 V AC/DC;
• Maximum consumption: 30 mA (TX), 15 mA (RX);
• Range: at least 12 m;
• Relay output contact load: 1 A max. / 30 V;
• Output contact type: NC/NO;
• Housing protection degree: IP54;
• Ambient temperature, °C: -20 … +60.

Signal lamp AN-Motors F5000

Signal light features:
• Wide range of supply voltage;
• Low power consumption;
• Operating mode with or without blinking;
• Built-in antenna;
• Mounting on a horizontal or vertical surface (bracket included);
• Outdoor installation;
Designed to warn (alarm) about the movement of automated gates and barriers. The versatility of the design allows the lamp to be used with any type of automation from AN-Motors or other manufacturers.

F5000 Specifications:
• Supply voltage: 12 V ÷ 24 V AC/DC, 85 V ÷ 265 V AC;
• Maximum consumption: 8 W (in flashing mode <2.5 W);
• Housing protection degree: IP54;
• Ambient temperature, °C: -20 … +60.

Heating element AN-Motors AH90

Features of AH90:
• Heating element in the form of a flexible bandage-type tape, which ensures ease and reliability of fastening;
• Silicone heating element shell ensures efficient heat dissipation;
• Built-in thermostat that provides automatic heating on and off;
Designed to ensure the operation of gate automation at negative ambient temperatures (up to -60°C). Direct application – heating of gearboxes of electromechanical drives of sliding gates of the ASL series and barrier ASB6000.

Technical characteristics of AH90:
• Rated supply voltage: 230 V / 50 Hz;
• Power consumption: 90 W;
• Response temperature: 10°C ± 3°C;
• Maximum heating: +125°C;
• Landing diameter of the heating element: 110 - 160 mm;
• Heating element shell protection degree: IP65;
• Overall dimensions of the heating element: 80×400 mm;
• Connection wire parameters: 0.5 mm2 / length 0.8 m;