Panoramic AluPro

For rooms with high humidity

Wide range of glazing options and additional options

Safe and practical gates made of panoramic panels made of 45 mm thick aluminum profiles. AluPro is an ideal solution for hi-tech buildings, car showrooms, and industrial facilities. Intermediate hinges and roller brackets made of stainless steel are highly resistant to corrosion, which allows the gate to be used in conditions of high humidity - in car washes, in coastal and industrial areas. 25,000-cycle springs and rugged construction are built to last.

AluPro - high quality and functionality

Specifications:
• Panel thickness - 45 mm
• Components (intermediate hinges and roller brackets) - Stainless steel
• Gate dimensions (max) – Width 7000 mm, height 6000 mm

Filling options:
• Single glazing 3 mm, double glazing 26 mm
• 3mm aluminum composite panel, 26mm aluminum composite panel

Types of canvas:
• LSA—fully panoramic
• ALPS—bottom panel—sandwich panel 45 mm, all others—panoramic
• Software—one or more panels are panoramic, the rest are sandwich panels

• Jumper height (min) - 230 mm (for gates without electric drive)
• Installation types - 10 types
• Basic spring life - standard set 25,000 cycles, on request 50,000, 75,000, 100,000 “lifting-lowering” cycles

AluPro door options and range
ALP - A variant of the canvas made of panoramic panels

ALPS - A variant of the canvas with a lower part in the form of a sandwich panel (thickness 40 mm and a choice of “S-corrugated” or “Microwave” pattern) and panoramic panels

Door leaf made of ProPlus sandwich panels with one or more panoramic panels

Double glazing 26 mm
Gate leaf made of ProPlus sandwich panels with one or more panoramic panels

Single glazing 3 mm
Uses impact-resistant acrylic with maximum transparency

Composite aluminum panel 26 mm
The panel is made from two aluminum sheets with stucco embossing and filled with polystyrene

Composite aluminum panel 3mm
The panel is made from two aluminum sheets without embossing and filled with polyethylene under high pressure

Panoramic gates with continuous glazing
Continuous glazing was developed for rooms where it is important to provide access to natural light. Advantageous display of products is an important advantage of such gates when installed in car dealerships and shops.

Gates up to 3000 mm wide are produced without an impost

Gates up to 5000 mm wide can be produced with one impost

9 standard colors from the RAL catalog at a standard price (no additional surcharge)

Additional accessories
AluPro has developed several practical options for panoramic gates:
• Wicket in the door leaf

With the help of a gate in the gate, the owner organizes an additional entrance inside. Thus, it will be possible to enter the premises without unnecessary operation of the gate. The option is a convenient solution for everyday use and significant savings in door life.

Three types of wickets are offered for AluTrend panoramic gates type PO:

With a standard threshold of 145 mm (for gates with widths from 4.5 to 7 m)
• Linear closer;
• Built-in wicket position sensor;
• Rain canopy;
• Reliable metal handles;
• Special catcher that prevents the sash from sagging.

With a low threshold of 100 mm (for gates with widths up to 4.5 m)
• Linear closer;
• Built-in wicket position sensor;
• Rain canopy;
• Reliable metal handles;
• Special catcher that prevents the sash from sagging.

With a flat threshold of 18 mm (for gates with widths up to 5 m)
• Linear closer;
• Built-in wicket position sensor;
• Rain canopy;
• Reliable metal handles;
• Special catcher that prevents the sash from sagging.

• Grid filling
For rooms that require constant ventilation, panoramic gates with lattice filling are perfect. This solution will be most in demand in parking lots. There are three types of gratings to choose from: drawn steel grating, steel grating, perforated aluminum sheet.

• Castle
For rooms without an additional entrance, a deadbolt lock is offered. It allows you to open and close the gate both from the inside and from the outside.
For panoramic gates type ALPS and PO.

• Side door
The side door and panoramic gates are made in the same style and fit harmoniously into the façade of the building, complementing each other perfectly.

• Anti-scratch coating
To protect the glazing from possible damage (scratches) during operation of the gate, SAN plastic with a special anti-abrasive coating is used. This coating maintains the transparency of the glazing for a long time, even after repeated cleaning. Available for 26mm double glazing.

• Hacking protection
With an anti-jacking device, the gate is reliably protected from intruders. In case of unauthorized lifting, the option will block the canvas.