Alutech

Alutech Accessories
To increase the efficiency of automation operation, comfort and safety, you can use additional elements - accessories.

Remote control Alutech AT-4N 4-channel
Features of the AT-4N Remote Control:
• Execution in the form of a keychain;
• Soft touch coating;
• Dynamic code;
• Up to 4 managed devices.
Designed for remote control of ALUTECH gate and roller shutter automation.

Technical characteristics of AT-4N:
• Operating frequency, MHz: 433.92 ±0.15;
• Code Dynamic;
• Number of channels: 4;
• Radiation power (no more), mW: 10;
• Range in open space (not less), m: 50;
• Consumption during transmission (no more), mA: 10;
• Consumption in standby mode / sleep mode (not less), µA: 0;
• Battery: lithium battery type CR2032 (3 V/220 mAh);
• Battery and gear life: 4000;
• Housing protection degree: IP54;
• Ambient temperature, °C: -10 … +60.

Universal radio receiver Alutech AR-1-500N

Features of the radio:
• Control of one device (single-channel);
• Small dimensions and weight;
• Relay output with normally open contact (NO);
• Built-in cable for connection;
• Built-in antenna.
Designed for remote control of ALUTECH gate automation using AT-4 and AT-4N remote controls.

Specifications AR-1-500N:
• Operating frequency, MHz: 433.92;
• Code: Dynamic;
• Number of channels: 1;
• Number of programmable control devices, pcs: 500;
• Supply voltage, V: 12 - 24 AC/DC;
• Maximum current consumption (no more), mA: 18;
• Relay output contact load: 1) 0.5 A max., 24 V DC | 2) 0.25 A max., 125 V AC
• Housing protection degree: IP40;
• Ambient temperature, °C: -20 … +50.

Photocells Alutech LM-L

Features of photocells:
• Small dimensions;
• Relay output with normally closed and normally open contacts (NC/NO);
• Visualization of work using LED;
• Stylish modern design.
Designed to recognize obstacles within the range of photocells.

Specifications LM-L:
• Supply voltage, V DC/AC: 12 - 24;
• Consumption of transmitter (TX), receiver (RX), mA: ≤30 (TX), ≤15 (RX);
• Range (not less), m: 12;
• Relay output contact load, A/V DC: 1/max. 30;
• Type of output contacts: NC and NO;
• Housing protection degree: IP54;
• Ambient temperature, °C: -20 … +60.

LED signal lamp Alutech SL-U

Signal light features:
• Wide range of supply voltage;
• Low power consumption;
• Operating mode with or without blinking;
• Built-in antenna;
• Mounting on a horizontal or vertical surface (bracket included);
• Outdoor installation.
Designed to warn (alarm) about the movement of automated gates and barriers. The versatility of the design allows the lamp to be used with any type of automation from ALUTECH or other manufacturers.

Technical characteristics of SL-U:
• Supply voltage, V: 12 - 230 AC/DC;
• Consumption (max.), W: 3;
• Connected wire cross-section (max.), mm2: 1.5;
• Housing protection degree: IP54;
• Ambient temperature, °C: -20 … +60.

Release cable Alutech RK

The release cable allows for external mechanical unlocking of the drive from the outside in cases where the gate needs to be switched to manual control mode (for example, in the absence of the main power source).

It is recommended for installation when the garage is not equipped with an additional entrance or gate. Used in conjunction with the RLT-403 locking device.

Specifications RK:
• RK-4500 — Cable length, mm: 4500; • RK-6000 — Cable length, mm: 6000.

Alutech release cable kit with RM
lock
The release cable allows for external mechanical unlocking of the drive from the outside in cases where the gate needs to be switched to manual control mode (for example, in the absence of the main power source).

It is recommended for installation when the garage is not equipped with an additional entrance or gate.

Specifications RK:
• RM0104-4500 — Cable length, mm: 4500.

Alutech ROA8

The galvanized steel rack is designed to convert the torque of the electric drive gear into linear movement of the sliding self-supporting gate leaf.

Technical characteristics of ROA8:
• Length 1 piece, mm: 1000.