Prestige

Swing gates Alutech Prestige

• Operational reliability
• Variety of design solutions
• Quick assembly and installation

The Alutech company has improved the design of entrance gates and created a new generation product - swing automatic gates of the Prestige series, which will take their rightful place both in the country and at industrial facilities.

Swing gates consist of two leaves attached to the opening posts using three sectional hinges. Gate leaves consist of frames assembled from aluminum profiles in which the infill is installed. The filling can be located both inside the frame (built-in type of installation) and outside (overhead type of installation). At the customer's request, it is possible to produce swing gate leaves with solid, sparse or combined filling. Infills can be installed horizontally or vertically.

• More than 20 design options for swing gates, varying in cost and design
• The main structural elements are made of aluminum profiles with a polymer coating
• High reliability of connections, eliminating sagging of the sashes during operation
• Reliable and high-quality three-section overhead hinges Fapim
• Hidden fasteners guarantee a high degree of protection against unauthorized access
• Easily removable design for repairing damage or replacing filling

Technical characteristics of swing gates Prestige

The design of ALUTECH automatic swing gates is distinguished by reliability and durability, high strength characteristics of the profiles and high-quality components for swing gates.

• Opening pillar
• Fence
• Gate leaf
• Gate leaf
• Side support
• Central stop
• Bracket for fastening the electric drive to the sash
• Electric drive
• Deadbolt
• Bracket for fastening the electric drive to the opening post

Types of installation of swing gates and wickets:
• Invoice for the opening: opening to the courtyard.
• Built into the opening: opening to the street and courtyard.

Swing gates - standard equipment:
• Gate frame (frame profile, connecting and corner profiles, glazing bead profile, impost)
• Infill (sandwich panel, aluminum or roller shutter profile)
• Equipment for swing gates (bolt, central stop, side stops, set of hinges, steel posts for fastening, handle for manual opening)
• Packaging

To lock the gate, a deadbolt is used, which is included as standard. Swing gates for cottages are also equipped with central and side stops.

Variety of design solutions for Prestige gates

The high technology of the system and the use of profiles of various widths and colors for the manufacture of gates make it possible to implement various color schemes in the finished structure - from classic white and brown to original ones, which allows us to offer the customer a gate with a unique style.

The unique configuration of Prestige series profiles allows us to offer the end user more than 20 options for design solutions for gates and wickets, varying in design and cost.

The surface-mounted and built-in type of infill installation assumes both horizontal and vertical installation.

Built-in type of frame filling installation:

Solid filling:
• Sandwich panel 45 mm
• Roller profile AG/77, AG/77H
• Aluminum profile 37 and/or 82 mm
• Aluminum profile 87 mm
• Alternative material (wooden board, metal profile, etc.)
Sparse filling with different steps:
• Aluminum profile 37 and/or 82 mm
• Alternative material (wooden board, metal profile, etc.)

Combined filling:
• Profile AG/77 and aluminum profile 37 / 82 mm
• Sandwich panel and aluminum profile 37 / 82 mm

Overhead installation type of frame filling:
Assumes two types of filling - solid and discharged:

• Aluminum profile 37 and/or 82 mm
• Aluminum profile 87 mm (only for solid filling type)
• Alternative material (wooden board, metal profile, etc.)

Types of filling for gates and wickets Prestige

Wide range of options for filling gates and wickets Prestige

Sandwich panel
Thanks to various patterns (microwave, horizontal corrugation, panel) and panel colors, the entrance gates are ideally combined with any finishing material.

Gates made of sandwich panels imitating wood texture (golden oak, dark oak, cherry) have all the advantages of steel gates and add elements of prestige and individuality to the cottage.

High strength and resistance to wind and shock loads

ALUTECH sandwich panel is one of the most durable panels in Europe. Its thickness is 45 mm, which determines the resistance of entrance gates and gates to wind and shock loads.

The increased density of the polyurethane foam filler (46-47 kg/m3) ensures the rigidity of the door leaf and high resistance to deformation.

Each sandwich panel is equipped with a polymer EPDM seal that maintains high mechanical strength and elasticity at low temperatures. The seal eliminates the appearance of gaps between the panels.

• Microwave
• S-corrugation
• M-Corrugation
• L-corrugation
• Panel

Roller shutter profiles
Roller rolling profile AG77

Uniform foam filling without pores or cavities guarantees high load resistance and minimizes profile deformation. It is possible to install the AG/77H profile with hard foam filling, which provides even greater resistance to wind and impact loads of the door leaf/wicket.

The paint and varnish coating of the profiles is resistant to abrasion, scratches, cracking and peeling, UV radiation - the color of the coating is maintained under intense solar radiation and corrosion, which is especially important for coastal areas and in urban environments.

A wide range of profile colors provides a variety of options for combining the gate with the building facade. Depending on the color, the entrance gate can blend into the facade or, conversely, serve as a bright element, creating original individual solutions.

Aluminum profiles
Aluminum extruded profiles in various widths: 37, 82 and 87 mm

At the customer's request, it is possible to produce a door leaf or wicket with continuous, sparse or combined filling with aluminum profiles. The filling can be installed horizontally or vertically.

High-quality aluminum alloys

For the production of aluminum profiles for Prestige swing gates, only primary aluminum is used. The high quality of aluminum alloys for the production of extruded profiles "ALUTECH" is confirmed by the conclusion of the accredited testing center of the state scientific institution "Institute of Powder Metallurgy" (certificate NoBY/112/02/1/0/0263), where the alloys were examined. The use of aluminum alloys in the production of the main structural elements of sliding, swing gates and wickets, as well as filling, eliminates corrosion and ensures a long service life of the products.

Alternative materials
The design of sliding gates provides for the possibility of manufacturing the door leaf from economical materials at the request of the customer.
You can install a profiled sheet, wooden board or any other sheet material into the aluminum gate/wicket frame.