Trend

Sectional doors Alutech Trend

• At an affordable price
• For regions with temperate climates
• For unheated premises

Trend gates are economical and functional gates made of 40 mm thick panels and galvanized steel fittings, which are optimally suited for regions with temperate and cold climates. They meet the requirements of European standards, while all security systems are supplied at no additional cost. The standard door set includes springs with the longest service life among competitors - up to 25,000 cycles.

Trend - safe and practical gates at an affordable price

Main characteristics of Trend gates:
• The thickness of the sandwich panel is 40 mm, comparable to a brick wall 55 cm thick
• Heat transfer resistance coefficient - 0.74 m2 °C/W*
• Roller brackets and intermediate hinges made of galvanized steel
• Possibility of installation in an opening larger than the custom size
• Balancing the blade with tension springs and torsion springs
• Maximum garage door size—6000×3000mm

With extension springs

With torsion springs

Assortment of sandwich panels Trend:
• Closed circuit of steel sheets A special system for connecting the inner and front steel sheets protects the panel from delamination, which is possible when the panel is heated in the sun. They are connected at the bottom and top in 4 layers using self-tapping screws. Thus, buyers of gates with a dark-colored leaf can be confident in the durability of the product.
• Protection against pinched fingers The Alutech panel has implemented one of the main European safety standards: it eliminated pinching of fingers (compliance with EN 12604).
• Excellent adhesion of steel sheets to foam. Good adhesion of steel sheets to foam was achieved through a layer of adhesive varnish (12 microns). Thus, the designers completely eliminated the swelling of the canvas heated in the sun.
• High anti-corrosion properties Increased anti-corrosion properties of the panel were achieved due to the primer layer (5-7 microns) and zinc coating (16 microns).
• Durable coating The door leaf was preserved in its original attractive form thanks to polyurethane paint with the addition of special polyamide particles (PUR-PA), which increase the anti-corrosion and protective properties of the panel.
• Good thermal insulation Good thermal insulation. 0.74 m² °C/Wt – heat transfer resistance coefficient in the manufacturer’s doors. The red brick wall, 55 cm, has the same size.

• S-corrugation
• M-Corrugation
• L-corrugation
• Microwave
• Panel

Additional accessories

Trend garage doors are also available with a set of additional elements and accessories:
• Wicket door

This type of gate is ordered if an additional entrance to the room is needed. Its use allows you not only to enter the premises without opening the gate, but also to save their resource. This option allows you to use the gate structure with maximum comfort.

The Alutech assortment includes 3 types of gates:

With a standard threshold of 145 mm (for gates with widths from 4.5 to 6 m)
• Linear closer;
• Built-in wicket position sensor;
• Rain canopy;
• Reliable metal handles;
• Special catcher that prevents the sash from sagging.

With a low threshold of 100 mm (for gates with widths up to 4.5 m)
• Linear closer;
• Built-in wicket position sensor;
• Rain canopy;
• Reliable metal handles;
• Special catcher that prevents the sash from sagging.

With a flat threshold of 18 mm (for gates with widths up to 5 m)
• Linear closer;
• Built-in wicket position sensor;
• Rain canopy;
• Reliable metal handles;
• Special catcher that prevents the sash from sagging.

• Built-in windows
Reducing electricity consumption and providing access to daylight - these are the tasks that built-in windows will solve. In addition, such garage doors will be remembered for their unusual design.

• Castle
To lock a garage door without an additional entrance, a lock is required. The lock has the ability to connect an electric drive unlocking device.

• Side door
The default door style is made the same as the garage door. Due to the identical pattern and color, the product will fit perfectly into the facade of any building. So, the same color and pattern look like a single whole.

• Unlocking automation
For automated gates, it is necessary to provide the possibility of emergency unlocking of the drive from outside the garage, for example, in the event of a power outage. A convenient and compact unlocking mechanism will ensure easy switching of the gate from automatic to manual control mode.