Wickets and Fences

The design of the Prestige series wicket profiles provides for the possibility of making the wicket in the same style as the design of sliding and swing gates. The configuration of the system profiles makes it possible to produce structures with different types of opening and installation.

For additional comfort, the ALUTECH Group of Companies offers you to equip your entrance gate with a nearby gate. It will provide an additional entrance to the territory. Its design is harmoniously combined with the appearance of the gate, allowing you to create unity of style.

Types of filling for Prestige gates

Wide range of filling options for Prestige gates:
• Sandwich panel
Thanks to various patterns (microwave, horizontal corrugation, panel) and panel colors, the entrance gates are ideally combined with any finishing material.

Gates made of sandwich panels imitating wood texture (golden oak, dark oak, cherry) have all the advantages of steel gates and add elements of prestige and individuality to the cottage.

High strength and resistance to wind and shock loads:
• ALUTECH sandwich panel is one of the most durable panels in Europe. Its thickness is 45 mm, which determines the resistance of entrance gates and gates to wind and shock loads.
• Increased density of polyurethane foam filler (46-47 kg/m3) ensures rigidity of the door leaf and high resistance to deformation.
• Each sandwich panel is equipped with a polymer EPDM seal that maintains high mechanical strength and elasticity at low temperatures. The seal eliminates the appearance of gaps between the panels.

• S-corrugation
• M-Corrugation
• L-corrugation
• Microwave
• Panel

Roller shutter profiles
Roller rolling profile AG77

Uniform foam filling without pores or cavities guarantees high load resistance and minimizes profile deformation. It is possible to install the AG/77H profile with hard foam filling, which provides even greater resistance to wind and impact loads of the door leaf/wicket.

The paint and varnish coating of the profiles is resistant to: abrasion and scratches; cracking and peeling; UV radiation – the color of the coating is preserved under intense solar radiation; corrosion, which is especially important for coastal areas and urban environments.

A wide range of profile colors provides a variety of options for combining the gate with the building facade. Depending on the color, the entrance gate can blend into the facade or, conversely, serve as a bright element, creating original individual solutions.

Aluminum profiles
Aluminum extruded profiles in various widths: 37, 82 and 87 mm

At the customer's request, it is possible to produce a door leaf or wicket with continuous, sparse or combined filling with aluminum profiles. The filling can be installed horizontally or vertically.

High-quality aluminum alloys

For the production of ADS400 aluminum profiles, only primary aluminum is used. The high quality of aluminum alloys for the production of extruded profiles "ALUTECH" is confirmed by the conclusion of the accredited testing center of the state scientific institution "Institute of Powder Metallurgy" (certificate NoBY/112/02/1/0/0263), where the alloys were examined. The use of aluminum alloys in the production of the main structural elements of sliding, swing gates and wickets, as well as filling, eliminates corrosion and ensures a long service life of the products.

Alternative materials
The design of sliding gates provides for the possibility of manufacturing the door leaf from economical materials at the request of the customer.
You can install a profiled sheet, wooden board or any other sheet material into the aluminum gate/wicket frame.

We offer fence sections of various sizes. To install them, you must first install the poles.

Features of the Prestige fencing section
• Easy installation due to a minimal set of components for assembly and installation.
• Harmony of style. An ideal solution for creating an aesthetic and stylish exterior in combination with gates and wickets, emphasizing the individuality of each home.

Characteristics:
Section sizes: from 2 to 5 meters

Popular factory fill options:
• Aluminum profile
The infill of aluminum extruded profiles 37 or 82 mm can be made in horizontal or vertical design with sparse or continuous installation types.
• Sandwich panel
Infill made of sandwich panels with patterns of microwave, panel, S, L, M corrugations 45 mm thick and a two-layer polymer coating with the possibility of painting in any color according to the RAL card.
• Roller profile
A wide range of colors of roller-rolled profiles provides a variety of options for combining gates with the building facade. Depending on the color, the entrance gate can blend into the facade or serve as a bright element emphasizing the individual style of the house.
• Combined filling
The unique look of the gate is given by the combined filling, which allows you to combine sandwich panels, aluminum and roller shutter profiles in various variations.